Menu
The heated Liberty H2O gloves have been specifically designed to be highly protective, waterproof, and feature high-tech THERMOTRONIC technology system that is meant to keep your hands at the ideal temperature.
The heated REV'IT Liberty H2O motorcycle gloves have been specifically designed to be highly protective, waterproof, and feature the Revit high-tech THERMOTRONIC technology system that is meant to keep your hands at the ideal temperature of around 33 degrees Celsius, regardless of weather influences such as wind, moist and cold. The THERMOTRONIC features 4 different heating levels (from higher heat to lower heat) that can easily be adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the button, it’s very easy to see what level of warmth your motorcycle gloves are providing.
The outside of the motorcycle gloves is constructed with a flexible softshell on the upper side, and leather on the inside of the hand. An additional grip patch on the palm further provides more control of the handlebars of your motorcycle. We combined Exkin® Platinum with PrimaLoft Gold ® insulation to keep your hands warm and comfortable in the cold. By using a hard-shell knuckle protector combined with a TPU palm slider, the motorcycle gloves offer a heavy dose of protection in case of a mishap. And since it has an incorporated hydratex|Z-liner construction for waterproofing.*
Additionally, reflective stripes and logos are added to the top of the hands for increased visibility. And let’s not forget the inclusion of the Connect Finger Tip fabric that allows you to operate touchscreens without removing your hand protection, especially when it’s cold out. Keep your hands comfortable even when temperatures take a dive with the Liberty H2O motorcycle gloves.
Specification batteries
Capacity: 7.4 Volts, 2350MAH
Input: MICRO 5V 2A
USB Output: 5V
Led Indicator
Battery charging time: 4-5HR*
Dimensions: 7.4 X 5 X 1.4 CM
Enclosed a quick start for the REV'IT heated gloves.
* A waterproof membrane does not mean unlimited waterproof. The waterproofness depends on the quality of the membrane. Are you looking for 100% waterproof? Then select a motorcycle glove with GoreTex membrane.
**Integrated 7.4V circuit heating system with adjustable heating levels. Set containing two 7.4V batteries and micro-USB lead included.
EAN 8700001351683
To safely store away your batteries, disconnect them from your garment, fully charge them and power off prior to storage. Keep your batteries in a cool, dry place out of direct sunlight and not below -20°C. Rev’it advises to charge every 6 months to maintain battery life. It is important to keep your battery charged. (Tip! Write it down in your diary).
Quick start guide
Please note, the included lithium-ion battery is not fully charged. Please fully charge before use. Only use a 5V @ 2.1A USB-A adapter for charging.
01. Fully charge both batteries to 100%. (Note: to check the remaining power of your batteries, shortly press the side battery power button once and the battery indicator lights will show the remaining power for 30 seconds.)
02. Open each glove pocket located on the palm side and plug battery into the glove's heating system. Turn on the battery by pressing the side battery power button for a few seconds until the glove control button lights up. The glove will automatically turn on with red led's showing on the gloves control button.
03. Slide the battery into the pocket on each glove and close the pocket with the hook-and-loop closure to keep your batteries safe.
04. To control heat levels, push the glove control button to reach your desired settings.
05. To turn off or turn on the gloves, press and hold the gloves touch control button for approximately 3 seconds. If you don't plan on using the gloves for more than a few days, unplug both batteries from the gloves.
If the gloves are not used for 30 minutes, they will enter a 'power save mode'. To reactivate the batteries, press and hold the side battery power button for 3 seconds until the battery indicator lights come back on.
Motorcycle gear comes in various levels of waterproofness, which is important for comfort and safety during wet rides. Most waterproof jackets, pants, gloves, and footwear have a membrane that prevents water from penetrating the outer layer. These products keep you dry, but there's a limit to how much they can penetrate. A waterproof membrane doesn't mean 100% waterproof. With prolonged exposure to rain or under high pressure, the outer layer can still let moisture through. This means you could get wet after longer rides in heavy rain, especially in areas where the fabric moves intensively or where seams are less well-protected.
Looking for 100% waterproof? Then choose a product with a Gore-Tex membrane. Gore-Tex is a specially designed membrane that is both waterproof and breathable. The membrane contains microscopic pores that are too small for water droplets to penetrate, but large enough to allow water vapor (sweat) to escape. This keeps rain and spray out, while your body heat and moisture are wicking away. You will ride dry and comfortable, even in prolonged or heavy rain.
In short: regular waterproof motorcycle clothing keeps out short(er) rainshowers, while Gore-Tex effectively protects against prolonged rain and at the same time provides breathable comfort.
