Menu
The THERMOTRONIC heating technology system equipped Liberty H2O Ladies motorcycle gloves are female-specific in fit and design, and ready to tackle the worst winter can throw at you!
The THERMOTRONIC heating technology system equipped REV'IT Liberty H2O Ladies motorcycle gloves are female-specific in fit and design, and ready to tackle the worst winter can throw at you – whether it’s wind, water, or cold. The Liberty H2O Ladies motorcycle gloves will keep your digits comfortably warm at 33 degrees Celsius.
Leaving the actual heating level up to you, the system features 4 different heating levels (from higher heat to lower heat) that can easily be suited to your own preference. The large button has a colored ring that makes it perfectly easy to spot the heat level you’re on, and switching is a breeze, too. The comfortably thick – yet not so thick you’re robbed of feel – Exkin® Platinum with PrimaLoft Gold ® insulation is there to keep your hands warm and comfortable in the cold.
Just keeping your hands warm isn’t enough. That’s why we’ve equipped the outer shell of the motorcycle gloves with flexible soft shell material, as well as leather, and to finish things off the hydratex|Z-liner is up to the task to keep your hands dry, too. Similarly important, the carefully placed reflective logos and striping will aid rider visibility. Rest assured your hands are kept comfortable when temperatures drop, knowing the Liberty H2O Ladies motorcycle gloves are up to the task.
Specification batteries
Capacity: 7.4 Volts, 2350MAH
Input: MICRO 5V 2A
USB Output: 5V
Led Indicator
Battery charging time: 4-5HR*
Dimensions: 7.4 X 5 X 1.4 CM
Enclosed a quick start for the REV'IT heated gloves.
* A waterproof membrane does not mean unlimited waterproof. The waterproofness depends on the quality of the membrane. Are you looking for 100% waterproof? Then select a motorcycle glove with GoreTex membrane.
**Integrated 7.4V circuit heating system with adjustable heating levels. Set containing two 7.4V batteries and micro-USB lead included.
EAN 8700001353953
To safely store away your batteries, disconnect them from your garment, fully charge them and power off prior to storage. Keep your batteries in a cool, dry place out of direct sunlight and not below -20°C. Rev’it advises to charge every 6 months to maintain battery life. It is important to keep your battery charged. (Tip! Write it down in your diary).
Quick start guide
Please note, the included lithium-ion battery is not fully charged. Please fully charge before use. Only use a 5V @ 2.1A USB-A adapter for charging.
01. Fully charge both batteries to 100%. (Note: to check the remaining power of your batteries, shortly press the side battery power button once and the battery indicator lights will show the remaining power for 30 seconds.)
02. Open each glove pocket located on the palm side and plug battery into the glove's heating system. Turn on the battery by pressing the side battery power button for a few seconds until the glove control button lights up. The glove will automatically turn on with red led's showing on the gloves control button.
03. Slide the battery into the pocket on each glove and close the pocket with the hook-and-loop closure to keep your batteries safe.
04. To control heat levels, push the glove control button to reach your desired settings.
05. To turn off or turn on the gloves, press and hold the gloves touch control button for approximately 3 seconds. If you don't plan on using the gloves for more than a few days, unplug both batteries from the gloves.
If the gloves are not used for 30 minutes, they will enter a 'power save mode'. To reactivate the batteries, press and hold the side battery power button for 3 seconds until the battery indicator lights come back on.
Motorcycle gear comes in various levels of waterproofness, which is important for comfort and safety during wet rides. Most waterproof jackets, pants, gloves, and footwear have a membrane that prevents water from penetrating the outer layer. These products keep you dry, but there's a limit to how much they can penetrate. A waterproof membrane doesn't mean 100% waterproof. With prolonged exposure to rain or under high pressure, the outer layer can still let moisture through. This means you could get wet after longer rides in heavy rain, especially in areas where the fabric moves intensively or where seams are less well-protected.
Looking for 100% waterproof? Then choose a product with a Gore-Tex membrane. Gore-Tex is a specially designed membrane that is both waterproof and breathable. The membrane contains microscopic pores that are too small for water droplets to penetrate, but large enough to allow water vapor (sweat) to escape. This keeps rain and spray out, while your body heat and moisture are wicking away. You will ride dry and comfortable, even in prolonged or heavy rain.
In short: regular waterproof motorcycle clothing keeps out short(er) rainshowers, while Gore-Tex effectively protects against prolonged rain and at the same time provides breathable comfort.
