Menu
Soft knuckle winter gloves with Thermotronic REV’IT! Heating Technology and battery pack included.
The heated Freedom H2O motorcycle gloves have been specifically designed to convey a sleek and elegant look and feel, yet they incorporate our high-tech THERMOTRONIC technology system that is meant to keep your hands at the ideal temperature of around 33 degrees Celsius, regardless of weather influences such as wind, moist, and cold.
The THERMOTRONIC features 4 different heating levels (from higher heat to lower heat) that can easily be adjusted with the large button on the upper side of the motorcycle glove. Thanks to the coloured ring around the button, it’s very easy to see what level your motorcycle gloves are currently set at.
The outside of the motorcycle gloves is constructed with flexible softshell material on the upper, and grippy leather on the inside of the hand. Their synthetic lining is combined with Exkin® Platinum® insulation and instantly provides a clear sense of comfort and protection against the cold. By using a soft impact protection knuckle, the motorcycle gloves are more comfortable to wear but will still offer a high level of armor. Thanks to the hydratex|Z-liner construction waterproofing is guaranteed.
Additionally, reflective stripes and logos are added to the top of the hand for increased visibility, without disturbing the clean and fresh look of the Freedom H2O motorcycle gloves. And let’s not forget the inclusion of the Connect Finger Tip fabric that allows you to operate touchscreens without removing your hand protection, especially when it’s cold out. Your hands stay comfortable with the Freedom H2O motorcycle gloves.
Outer shell material
Protection
Waterproofing
Insulation
Adjustability
Closure
Lining
Features:
Visibility
Enclosed a quick start for the REV'IT heated gloves.
* A waterproof membrane does not mean unlimited waterproof. The waterproofness depends on the quality of the membrane. Are you looking for 100% waterproof? Then select motorcycle gloves with a GoreTex membrane.
EAN 8700001352277
To safely store away your batteries, disconnect them from your garment, fully charge them and power off prior to storage. Keep your batteries in a cool, dry place out of direct sunlight and not below -20°C. Rev’it advises to charge every 6 months to maintain battery life. It is important to keep your battery charged. (Tip! Write it down in your diary).
Quick start guide
Please note, the included lithium-ion battery is not fully charged. Please fully charge before use. Only use a 5V @ 2.1A USB-A adapter for charging.
01. Fully charge both batteries to 100%. (Note: to check the remaining power of your batteries, shortly press the side battery power button once and the battery indicator lights will show the remaining power for 30 seconds.)
02. Open each glove pocket located on the palm side and plug battery into the glove's heating system. Turn on the battery by pressing the side battery power button for a few seconds until the glove control button lights up. The glove will automatically turn on with red led's showing on the gloves control button.
03. Slide the battery into the pocket on each glove and close the pocket with the hook-and-loop closure to keep your batteries safe.
04. To control heat levels, push the glove control button to reach your desired settings.
05. To turn off or turn on the gloves, press and hold the gloves touch control button for approximately 3 seconds. If you don't plan on using the gloves for more than a few days, unplug both batteries from the gloves.
If the gloves are not used for 30 minutes, they will enter a 'power save mode'. To reactivate the batteries, press and hold the side battery power button for 3 seconds until the battery indicator lights come back on.
Motorcycle gear comes in various levels of waterproofness, which is important for comfort and safety during wet rides. Most waterproof jackets, pants, gloves, and footwear have a membrane that prevents water from penetrating the outer layer. These products keep you dry, but there's a limit to how much they can penetrate. A waterproof membrane doesn't mean 100% waterproof. With prolonged exposure to rain or under high pressure, the outer layer can still let moisture through. This means you could get wet after longer rides in heavy rain, especially in areas where the fabric moves intensively or where seams are less well-protected.
Looking for 100% waterproof? Then choose a product with a Gore-Tex membrane. Gore-Tex is a specially designed membrane that is both waterproof and breathable. The membrane contains microscopic pores that are too small for water droplets to penetrate, but large enough to allow water vapor (sweat) to escape. This keeps rain and spray out, while your body heat and moisture are wicking away. You will ride dry and comfortable, even in prolonged or heavy rain.
In short: regular waterproof motorcycle clothing keeps out short(er) rainshowers, while Gore-Tex effectively protects against prolonged rain and at the same time provides breathable comfort.
